Publish Time: 2021-07-07 Origin: Site
The kettle is a relatively high-frequency item in daily life. Almost every family and hotel may use an electric kettle to boil water every day, so it is easy to break. Using kettles and trays is just a small thing in life, and few people care about them. However, it is often a small thing. If you don't pay attention to it, the kettle & trays may break, and the most important thing may endanger everyone's health and safety. So, how do we use a kettle to boil water? What are the points to pay attention to when using it?
Here is the content list:
How should we use the kettle to boil water?
What are the precautions when we use the kettle?
How to extend the service life of the kettle and tray?
First of all, the water injected into the kettle should be at least a few millimeters higher than the highest surface of the heater, but should not exceed the specified maximum water level. In other words, the injected water is in an interval, so be careful. A few millimeters higher than the top surface of the heater is to prevent the heater from drying out; not exceeding the specified maximum water level is to prevent splashing when boiling water, making the table and the floor full of water.
When in use, you must fill in water first, and then turn on the electricity. Don't turn on electricity first and then fill water. This way, to prevent the kettle from drying out, it will seriously reduce the life of the kettle & trays. Nowadays, in many places, an automatic water discharge is used, which can sense and discharge water according to the capacity of the kettle. Press the switch to automatically put water into the kettle, and then automatically stop when it's almost done.
When using the kettle, it is necessary to frequently remove the scale and other stains in the kettle, otherwise, it will affect the thermal efficiency and life of the kettle & trays. The water used must contain more or fewer impurities, and if the water is boiled for a long time, impurities will accumulate. For scale, you can use salt particles to wipe. Salt has a special function in removing scale and alkali. Therefore, it is necessary to frequently remove the scale and stains in the pot.
When using a kettle to boil water, if the kettle is plastic, you should open the lid as soon as possible after the water boils, or pour the boiling water into the thermos as soon as possible, to avoid the long plastic smell of the kettle & trays. A lot of time has dissolved into the water. This way, you don’t have to worry about peculiar smells when you drink water.
When pouring water, do not pour boiled water or make a drink with power on, it is too unsafe. Everyone knows that the consequences of electric shock are very serious. So, wait for the water to boil, and then pour the water when the power is off.
Do not use a kettle to boil things with acid, alkali, and salt components, so as not to corrode the kettle body and heater. If the kettle & trays are corroded, the boiling water will also smell bad.
When the kettle & trays are used, it is best to place them in a dry place to avoid moisture and reduce their safety performance.
Easton Hotel Supplies Co., Ltd.'s kettle & trays have been exported to 100 countries and regions, serving more than 3,000 hotels. Easton Hotel Supplies Co., Ltd. is a company with a long history, and the quality of its hotel supplies is trustworthy. If you are in the kettle & tray business, you can consider using our cost-effective products.
Sign up for our newsletter
Copyright © 2021 Easton Hotel Supplies-The Global Hotel Room Total Solution Provider-All Rights Reserved.